ESBoltScanner from Eclipse Scientific



Bolts, like any other structural component, are susceptible to defects such as corrosion and cracking. In order to comply with safety regulations and to maintain structural integrity, these bolts are required to be inspected and if defective, monitoring and/or replacement would be required.


Phased array inspection using the BoltScanner enables hard copy output and easy-to-interpret imaging. It also provides the ability to monitor component condition. It can be applied to bolts, studs, bridge pins and other similar applications. For a quick review of bolt condition, upon completion of the scan, the operator can move through the scan data. This data is digitally stored enabling periodic monitoring and options for post-analysis or remote analysis.


Eclipse Scientific offers two software solutions for your bolt inspection requirements: ESBeamTool allows you to easily design and simulate an inspection and generates comprehensive documentation of your inspection technique, while ESInspectionBank provides effective process management and secure control of scan data, from acquisition to analysis reporting.


The BoltScanner can scan a wide range of bolt sizes by selecting from a variety of clamp hubs. Each clamp hub is marked with the maximum width across flats (WF) of the bolt head or nut to be inspected. Special order housings can be made to accommodate bolt sizes outside the standard range or probe.

Standard Package

  • Bolt Scanner for small bolt sizes ½" to 1" (M12-M27)
  • Bolt Scanner for medium bolt sizes 1" to 1-1/2" (M27-M39)
  • Bolt Scanner for large bolt sizes 1-3/8" to 2" (M35-M52)
  • Wear face probe covers
  • Mini-Wheel Encoder
  • Product Documentation
  • Tool Kit

Download the Eclipse Scientific ESBoltScanner Datasheet here.

If you have any questions regarding the Eclipse ESBoltScanner, please email This email address is being protected from spambots. You need JavaScript enabled to view it..